Viewing Authenticated Hosts; Defining Multiple Hosts - 3Com 3CRUS2475 User Manual

Viewing
Authenticated Hosts
Defining Multiple
Hosts
defined. Unauthenticated VLANs are available to users, even if the ports
attached to the VLAN are defined as authorized.
Advanced port-based authentication is implemented in the following
modes:
Single Host Mode — Allows port access only to the authorized host.
■
Multiple Host Mode — Multiple hosts can be attached to a single
■
port. Only one host must be authorized for all hosts to access the
network. If the host authentication fails, or an EAPOL-logoff message
is received, all attached clients are denied access to the network.
Unauthenticated VLANS — Are available to users, even if the ports
■
attached to the VLAN are defined as unauthorized.
The Authenticated Hosts Page displays user port access lists. The
Authenticated Hosts Page contians the following fields:
User Name — Contains a list of the various RADIUS servers used as
■
authenticators, as defined in the Add User Name.
Port — Indicates the port number for which the User Name List
■
applies. User Name Lists can apply to more than one port.
Session Time — Indicates the amount of time the user was logged
■
on to the device. The field format is Day:Hour:Minute:Seconds, for
example, 3 days:2 hours: 4 minutes: 39 seconds.
Authentication Method — Indicates the method by which the last
■
session was authenticated. The possible field values are:
Remote — Indicates that the user was authenticated from a
■
remote server.
None — Indicates that the user was not authenticated.
■
MAC Address — Indicates the supplicant MAC address was used
■
for authentication.
MAC Address — Displays the supplicant MAC address.
■
The Authenticated Host Summary Page contains a list of authenticated users.

Viewing Authenticated Hosts

59