Getting Started; Starting The 3Com Embedded Web Interface - 3Com 3CRUS2475 User Manual

2
Starting the 3Com
Embedded Web
Interface
G
ETTING
This section provides an introduction to the user interface, and includes
the following topics:

Starting the 3Com Embedded Web Interface

■
Understanding the 3Com Embedded Web Interface
■
Saving the Configuration
■
Resetting the Device
■
Restoring Factory Defaults
■
Logging Off the Device
■
Disable the popup blocker before beginning device configuration using
the EWS.
This section contains information on starting the 3Com Embedded Web
interface. To access the 3Com user interface:
1 Open an Internet browser.
2 Ensure that pop-up blockers are disabled. If pop-up blockers are enable,
edit, add, and device information messages may not open.
3 Enter the device IP address in the address bar and press Enter. The Enter
Network Password Page opens:
S
TARTED