Defining Wireless
Radio Settings
802.11b/g
Defining
Radio Settings
Last Time Heard — Sorts according the last time the rogue was
■
detected on wireless network.
Channel — Sorts according to the access point channel used from
■
which the rogue is transmitting.
Mitigate — Sorts by mitigated access point channels.
■
2 Select an option from Sort by drop-down list to display the table.
3 Once the table appears, select the check box to enable mitigation for
each access point.
4 Click
. The Mitigation table is updated, and the device is updated.
Access Points can have up-to two radio interfaces. However, each radio
interface is configured and controlled separately. Radio interfaces inherit
the common configuration parameters from the ESS configuration. This
section contains information for defining WLAN Radio settings, and
includes the following topics:
Defining 802.11b/g Radio Settings
■
Configuring Radio 802.11a Settings
■
WLAN communications are transmitted via radio waves. The "Defining
802.11b/g Radio Settings" allows network managers to configure WLAN
Radio settings for transmitting WLAN communications.
Defining Wireless Radio Settings
169