Configuring Address Tables; Viewing Static Addresses - 3Com 3CRUS2475 User Manual

122 C 5: C
HAPTER ONFIGURING
Configuring
Address Tables
Viewing Static
Addresses
W P
IRED ORTS
MAC addresses are stored in either the Static Address or the Dynamic
Address databases. A packet addressed to a destination stored in one of
the databases is forwarded immediately to the port. The Dynamic
Address Table can be sorted by interface, VLAN, and MAC Address. MAC
addresses are dynamically learned as packets from sources arrive at the
device . Addresses are associated with ports by learning the ports from
the frames source address. Frames addressed to a destination MAC
address that is not associated with any port, are flooded to all ports of the
relevant VLAN. Static addresses are manually configured. In order to
prevent the bridging table from overflowing, dynamic MAC addresses,
from which no traffic is seen for a certain period, are erased.
To open the Figure 57:
1 Click Wired Ports > Address Tables > Static Addresses Summary.
Figure 57 Static Addresses Summary Page
The Static Addresses Summary Page contains the following fields:
VLAN ID — The VLAN ID attached to the MAC Address, and a VLAN
■
called a Routed Interface.