Configuring Eap Statistics - 3Com 3CRUS2475 User Manual

Configuring EAP
Statistics
Broadcast Mode — Specifies the Broadcast mode currently enabled
■
on the device. The possible field values are:
Unknown Unicast, Multicast & Broadcast — Counts Unicast,
■
Multicast, and Broadcast traffic.
Multicast & Broadcast — Counts Broadcast and Multicast traffic
■
together.
Broadcast Only — Counts only Broadcast traffic.
■
Broadcast Rate Threshold — Indicates the maximum rate (kilobits
■
per second) at which unknown packets are forwarded. The range is
3,500-1,000,000. The default value is 3,500.
2 Modify the fields.
3 Click
. Storm control is enabled on the device.
The EAP Statistics Summary Page contains information about EAP packets
received on a specific port.
To view EAP Statistics:
1 Click Policy > Security > EAP Statistics. The EAP Statistics Summary
Page opens:
Figure 39 EAP Statistics Summary Page
The EAP Statistics Summary Page contains the following fields:

Configuring EAP Statistics

71