Connecting Power (If Required); Configuring Your Scanner - Motorola Symbol LS2208 Product Reference Manual

1 - 4 Symbol LS2208 Product Reference Guide

Connecting Power (if required)

If the host does not provide power to the scanner, use an external power connection to the scanner:
Connect the interface cable to the bottom of the scanner, as described in
1.
1-3.
Connect the other end of the interface cable to the host (refer to the host manual to locate the correct port).
2.
Plug the power supply into the power jack on the interface cable. Plug the other end of the power supply into
3.
an AC outlet.

Configuring Your Scanner

To configure the scanner, use the bar codes included in this manual, or the 123Scan configuration program.
See Chapter 4, User Preferences
Chapter 11, 123Scan
The scanner supports RS-232, IBM 468X/469X, Keyboard Wedge, Wand Emulation, Undecoded Scanner
Emulation, USB, and Synapse to interface to a host system. Each host specific chapter describes how to set up
each of these connections.
for information about programming the scanner using bar code menus. See
to configure the scanner using this configuration program. 123Scan includes a help file.
Installing the Interface Cable on page