Scanning in Hands-Free Mode
The Symbol LS2208 Intellistand adds greater flexibility to scanning operation. See
Mounting the Stand
scanning.
Assembling the Stand
One piece scanner
"cup" with flexible neck.
Flat areas
Stand base
Wingnut
Assembling the Stand
Figure 2-5
NOTE Before tightening the wingnut under the base, ensure that the flat areas on the flexible neck fit securely in
the grooves in the base.
(optional), and
Scanning in the Hands-Free Mode
1.
2.
3.
4.
for more information about hands-free
Unscrew the wingnut
from the bottom of the
one piece scanner "cup".
Fit the bottom of the neck
piece into the opening on
the top of the stand base.
Tighten the wingnut
underneath the base to
secure the cup and neck
piece to the base (see
the note below).
Bend the neck to the
desired position for
scanning.
Scanning
Assembling the
Stand,
2 - 7