Page 1
CAP SOFTWARE Programming Your Motorola Symbol LS2208...
Page 2
This document will show you how to program your Motorola Symbol LS2208 scanner to read barcodes the way they are formatted in your Inventory. Most of your products have UPC-A barcodes that have 12 digits with 10 digits in the middle, one in the front and one at the end.
Page 3
All of these codes and more are found in the Motorola Symbol LS2208 user manual found here: http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=58808 08apdf&sliceId=&dialogID=396264713&stateId=1%200%20396250821 Reset to factory defaults (usually not necessary)
Page 4
Carriage Return (simulates Enter key) - Use this if when you scan a barcode, you have to press enter to get the item # onto the invoice grid 1. Scan Option 2. Scan <Data><Suffix> 3. Scan Enter...
Page 5
UPC-A Transmit the first digit Transmit the last digit Remove the first digit Remove the last digit UPC-E Transmit first digit Transmit the last digit Remove first digit Remove the last digit...