Scanned Image Blank; Network Troubleshooting; Wired Network Troubleshooting; Computer Unable To Detect The All-In-One Printer - Kodak ESP 7 ALL-IN-ONE PRINTER User Manual

Probable Cause 2
Your Kodak printer is not connected to your computer.
Corrective Action
Connect your Kodak printer to your computer with a standard USB cable.
Probable Cause 3
The Kodak Home Center software is not installed.
Corrective Action
Insert the Kodak printer installation CD and install the software.
Probable Cause 4
Your computer system resources may be low.
Corrective Action
•
Turn off your computer and the printer, and then turn them back on.
•
If the problem still persists, try scanning at a lower resolution.
Probable cause 5
The memory card to which you are scanning does not have enough free space to save the
scanned photo.
Corrective action
Remove some files from the memory card to free up some space.

Scanned image blank

Probable Cause
Your original is not placed correctly on the scanner glass.
Corrective Action
Place your original face down in the proper corner of the scanner glass.

Network troubleshooting

Wired network troubleshooting

Computer unable to detect the All-in-One printer

Probable Cause 1
Cables are not connected properly.
Kodak ESP 7 Printer User Guide
Chapter 9
85