Upgrading The Printer Software - For Macintosh - Kodak ESP 7 ALL-IN-ONE PRINTER User Manual

Maintaining Your Printer

Upgrading the printer software - for Macintosh

You can upgrade the software and firmware for in your All-in-One printer with the most
recent release available. This requires an Internet connection.
Note:
connected via a network or Wi-Fi. Your All-in-One printer must be connected to
the computer with a USB cable in order to perform a firmware upgrade.
1 If your connection is via Ethernet, disconnect the Ethernet cable. If your connection is
via Wi-Fi, press
Radio off
2 Connect the printer to the computer with a USB cable. The computer must be
connected to the internet.
3
Open a browser window and enter the following URL:
http://www.kodak.com/go/aiosupport.
4 Select your printer model.
Downloads
5 Under
6 Select your operating system from the drop down list.
7 Download the software.
8 Double-click on the *.dmg file.
9 Double-click on
10 Follow the onscreen prompts on the installer.
11 Upon completion of the install, click
and scanner drivers are updated.
12 Next you will update printer firmware.
13 Open a browser window and enter the following URL:
http://www.kodak.com/go/aiosupport.
14 Select your printer model.
Downloads
15 Under
16 Select your operating system from the drop down list.
17 Download the firmware.
18 Double-click on the *.dmg file.
19 Double-click on
20 Upon completion of the install, click
70
The firmware cannot be upgraded when your All-in-One printer is
Menu
. Navigate to
.
Software Driver and Firmware Downloads
, select
Install Software
.
Software Driver and Firmware Downloads
, select
Kodak AiO Updater
Network Settings
menu and press
Restart
. The Home Center software and the printer
.
Quit
. The printer firmware is updated.
Kodak ESP 7 Printer User Guide
OK WIFI
. Select
.
.