Kodak ESP 7 ALL-IN-ONE PRINTER User Manual page 35

•
If more Wi-Fi networks are detected than can be shown on the LCD screen, the
display includes the
LCD screen. As appropriate, press
network you want to use.
The last two options displayed are
networks
Note:
above, the LCD screen will show the actual network name (SSID), without the
brackets, and the signal strength, displayed as a percentage, of each available
Wi-Fi network within range.
4 With the desired network selected, press
information such as a security string, in order to authenticate your connection.
Note:
its security string to connect your printer to the network successfully. Contact
your Internet provider or the person who helped you configure your network to
assist you.
5 If you are looking for a Wi-Fi network that does not broadcast its SSID, see "Connecting
to an unlisted network" below.
Note:
network settings are saved and the printer will automatically attempt to reconnect
you to that network.
6 If the network requires the entry of a security string, the keyboard will be shown on the
LCD screen. Press
7 Enter the security string. The correct upper and lower case characters and numbers are
required.
Note:
(backspace) and press
Kodak ESP 7 Printer User Guide
(page down) symbol and/or the
.
In your setup, instead of
You will need to know the network name (SSID) of the Wi-Fi network and
If your printer was last connected to an available network on the list, the
, , or
To erase any letters or numbers entered in error, select
OK
or on the control panel until you locate the
Unlisted network
and
<Network name>
OK
. You may need network identification
to select a key. Press
.
Chapter 3
(page up) symbol on the
Rescan for wireless
as shown in the illustration
OK
.
<BKSP>
27