Setting Up Your Printer
•
A functional Ethernet network that includes a router, switch, or hub with an
Ethernet port
•
A CAT-5 (or higher) Ethernet cable
Ethernet setup
1
Plug one end of the Ethernet cable into the Ethernet port located on the back of the All–
in–One printer and the other end into an available port on your Ethernet router or hub.
2
Turn on the printer, if necessary.
3
From the control panel, press
Press
until
OK
4
Press
5
Verify the connection.
Configuring a wireless network connection
You can connect your printer to aN 802.11 wireless (Wi-Fi) network from the All-in-One
printer control panel.
24
Menu
Network Settings
is selected.
.
.
Kodak ESP 7 Printer User Guide