Omron ZFX-C Command Reference Manual page 51

Size inspection parameters
Area
Data No. Parameter
52 Measure axis angle
53 Fill profile
54 Calibration
55 Coordinates mode
71 Area upper limit value
72 Area lower limit value
73 Gravity position X upper limit value
74 Gravity position X lower limit value
75 Gravity position Y upper limit value
76 Gravity position Y lower limit value
77 Axis angle upper limit value
78 Axis angle lower limit value
ZFX-C Serial Communication Command Reference
Output Range
0: OFF, 1: ON
0: OFF, 1: ON
0: OFF, 1: ON
0: Normal 1: Pos. correction
0.000 to 9999999.999
0.000 to 9999999.999
-9999.999 to 9999.999
-9999.999 to 9999.999
-9999.999 to 9999.999
-9999.999 to 9999.999
-90.00 to 90.00
-90.00 to 90.00
About Communication Commands
49