Omron ZFX-C Command Reference Manual page 18

Starting Continuous Measurement
< Command format >
M E A S U R E
< Response format >
When processing ends successfully
Measurement value
O K C R
When processing fails
C R
E R
Ending Continuous Measurement
< Command format >
M E A S U R E
< Response format >
When processing ends successfully
O K C R
When processing fails
E R C R
Performing re-measurement using saved images
< Command format >
M E A S U R E
< Response format >
When processing ends successfully
Measurement value
O K C R
When processing fails
• Measurement images are not stored in the specified save memory No.
• [Image storage] option is set to OFF
E R C R
< Explanation of parameters >
Measurement value
16
About Communication Commands
or
/ C C R M / C C R
(for number of continuous measurements)
C R
or
/ E C R M / E C R
or
/ I C R
Save memory No.
(max. 2 digits)
C R
The re-measurement value for the saved image of specified save memory No. is returned.
When the save memory No. is omitted, the re-measurement value for the latest saved
image is returned.
Configuration of Measurement Value Data p.8
M / I C R
Save memory No.
(max. 2 digits)
ZFX-C Serial Communication Command Reference