Restarting the Controller < RESET command >
This command restarts the Controller. No parameters are provided for this command.
< Command format >
or
C R
R E S
E T
< Response format >
When processing ends successfully
None
When processing fails
C R
E R
Ending Ethernet Communications < EXIT command >
This command ends the TELNET connection for Ethernet communications and disconnects the line.
No parameters are provided for this command.
< Command format >
E X
I T
C R
< Response format >
When processing ends successfully
None
When processing fails
C R
E R
38
About Communication Commands
C R
R S
ZFX-C Serial Communication Command Reference