Omron ZFX-C Command Reference Manual page 47

Data No. Parameter
23 Maximum value
24 Minimum value
Parameters for inspection by individual application
Grouping (available only on ZFX-C20/C25/C10H/C15H)
Data No. Parameter
0 Judgment result
1 Correlation
2 Measurement position X
3 Measurement position Y
4 Index No.
Defect
Data No. Parameter
0 Judgment result
1 Defect
2 Maximum density
3 Minimum density
4 Number of defects
5 Defect position X
6 Defect position Y
7 Reference position X
8 Reference position Y
9 Position difference X
10 Position difference Y
ZFX-C Serial Communication Command Reference
Output Range
0 to 100.0
0 to 100.0
Output Range
0: OK
-1: NG
-2: not measured
0 to 100
-9999.999 to 9999.999
-9999.999 to 9999.999
0 to 633
Output Range
0: OK
-1: NG
-2: not measured
0 to 255
0 to 255
0 to 255
0 to 255
-9999.999 to 9999.999
-9999.999 to 9999.999
-9999.999 to 9999.999
-9999.999 to 9999.999
-9999.999 to 9999.999
-9999.999 to 9999.999
About Communication Commands
45