Omron ZFX-C Command Reference Manual page 39

Executing Display Capture to Output an Image < CAPTURE Command >
This command executes display capture.
Captured images are output to the SD card or external devices.
Important
When parameter (mode No.) input is omitted, captured images are output to the SD card.
Note
Captured images are transferred to external devices by XMODEM protocol.
Images are sent in bitmap format. Save the images with ".BMP" file extensions.
< Command format >
C A P T U R E C R
Mode No.
(0 or 1)
< File transfer >
When the mode No. is set to 0 and the image is output to external devices, the image data is transferred by
XMODEM (-CRC or SUM) after READY is received. XMODEM (-1k) is not supported.
< Response format >
When Mode No. is set to 0:
R E A D Y C R
When processing ends successfully
O K C R
When processing fails
C R
E R
When Mode No. is set to 1 or omitted:
When processing ends successfully
O K C R
When processing fails
C R
E R
< Explanation of parameters >
Mode No. Description
0 Display capture is executed and the captured display is output as an image to external
devices.
1 or omitted Display capture is executed and the captured display is output as an image to SD card.
The captured image is stored to CAPTURE directory in the SD card.
ZFX-C Serial Communication Command Reference
or
C P C R
Mode No.
(0 or 1)
About Communication Commands
37