Power Supply - Omron V400-H201 User Manual

Section 2
Installation and Connections

Power Supply

Power must be supplied to the V400-H101/H201 via the cable. Wire the power supply
independently of other devices. In particular, keep the power supply wired separately from
inductive loads. Use a power supply that meets the following requirements.
Power Supply Requirements
Output current
1 A min.
Recommended Power Supply
Model
S82K-00705
Use a DC power supply with safe extra-low-voltage circuits to prevent high voltage. If UL recognition is
required for the overall system, use a UL Class II DC power supply.
■ Connection Method
Wire the power supply cables as shown in the following diagram.
Connect the brown wire to the positive (+) side of the power supply and connect the blue wire to the
negative ( − ) side of the power supply.
V400-H101/201
26
User's Manual
Power supply voltage
5 VDC±10%