Omron V400-H201 User Manual page 25

Use a force of no more than 15 to 20 N to plug in the connector. Pull gently on the cable (approxi-
mately 10 N) to make sure the connector is securely connected. After the connector is plugged in,
do not apply a force of more than 30 N to the connector in the following directions. Excessive force
will damage the connector.
3.
Place the cable in the groove provided for it in
the case.
4.
Close the cover.
Keep fingers clear when closing the case to pre-
vent the case closing on them.
30 N
30 N
30 N
Section 2
Installation and Connections
V400-H101/201
23
User's Manual