Stand (Optional) - Omron V400-H201 User Manual

Section 2
Installation and Connections

Stand (Optional)

The Stand is for holding the V400-H101/H201.
Mounting Procedure
1.
Use two M4 screws to mount the Stand.
Placing the Handheld 2D Code Reader on the Stand
1.
Place the Handheld 2D Code Reader in
the Stand as shown in the diagram on
the right.
The Stand is designed to be placed on a horizontal surface. Do not mount the Stand to a wall or
other similar surface.
V400-H101/201
28
User's Manual
Mounting Hole Dimensions
Two, M4 or
(Unit: mm)
4.2-dia. holes
20.0