Basic Operation - Omron V400-H201 User Manual

Section 3
Reading 2D Code

Basic Operation

Turn ON the power to the power supply device and start the Handheld 2D Code Reader.
Press the trigger buttons and keep pressed while
moving the Handheld 2D Code Reader close to the
2D code.
The read data is output to the monitor and RS-232C
communications.
If no operation is performed during a fixed interval, the Handheld 2D Code Reader will enter a sleep state.
Pressing the trigger buttons will release the sleep state.
The following functions are provided with the Handheld 2D Code Reader.
• Sleep
• Data Conversion on Display
• Data Accumulation
V400-H101/201
32
User's Manual
Startup
Reading 2D Code
Outputting Results
Functions
p.33
p.34
p.35
OK SD
ABCDEFGHIJKLMNOPQRST
p.37