Memory Cards - Omron V400-H201 User Manual

Memory Cards

The Handheld 2D Code Reader uses Memory Cards to upload or backup setting data and
data to be read. SD Memory Cards are supported.
• Conforms to SD Memory Card "Physical Layer Specification 1.01"
• File format: FAT16
Save the data to the Memory Card, insert the Memory Card in the personal computer, and
upload the data to easily backup the data to the personal computer. SD Memory Cards are
provided with a write prohibit switch to prohibit writing to or formatting of the Memory Card.
When the switch is set to LOCK, data cannot be written to or deleted from the Memory Card,
and the Memory Card cannot be formatted. These functions are possible by setting the switch
to the unlocked state.
Inserting the Memory Card
1.
Open the Memory Card slot cover.
Lift the cover gently, without using excessive
force.
2.
Position the Memory Card in the correct
direction and insert in the slot until a click is
heard.
Insert the Memory Card in the direction with the
label side facing the same direction as the moni-
tor of the Handheld 2D Code Reader.
3.
Close the Memory Card slot cover.
Section 2
Installation and Connections
V400-H101/201
29
User's Manual