Omron V400-H201 User Manual page 55

Uploading Setting Data to the 2D Code Reader
1.
Select Upload Settings.
In the menu window, press the left trigger button and select Upload Settings.
After selection, press the right trigger button to confirm the setting.
The file selection window will be displayed.
2.
Select the data setting file.
In the file selection window, press the left trigger button and select the data setting
file to be used.
After selection, press the right trigger button to confirm the setting.
The contents of the SETTINGS folder in the Memory Card will be displayed.
After the load window is displayed, the save selection window will be displayed.
3.
Save the setting data.
In the save selection window, press the left trigger button and select YES.
After selection, press the right trigger button to confirm the setting and save the
data.
After the save window is displayed, the menu window will be displayed.
4.
Exit setting mode.
In the menu window, press the left trigger button and select Exit.
After selection, press the right trigger button to exit setting mode.
Section 4
System Settings
V400-H101/201
User's Manual
53