Check Project Window - Omron TJ1-MC04 - PROGRAMMING 1 Programming Manual

Trajexia Tools interface
5.3.2

Check Project window

Trajexia Tools starts the Check Project window when connected to
the Trajexia system. A comparison is made between the program
files in the Trajexia system and the program files on the PC.
If the program files are different the Check Projects window shows:
• Save
• Load
• Change
• New
• Resolve
• Cancel
Save
Uploads the project that is in the Trajexia system to the PC.
A project of the same name on the PC is overwritten. Before you
save to the PC make sure that the program on the PC has a back-
up copy first.
Load
Downloads the project that is in the PC to the Trajexia system.
The project on the Trajexia system is overwritten. Before you load
to the Trajexia system, make sure that the program on the Trajexia
system has a back-up copy first.
Change
Lets you open a project that is on your PC that is different to the
default project.
If the project on the Trajexia system and the PC are not the same,
you can use Change to select a different project on the PC.
Trajexia Tools again checks both projects. This is needed when
working on multiple applications with different projects.
PROGRAMMING MANUAL
fig. 21
192