Omron NSH5 - 10-2010 Operation Manual page 115

Removable Box Application Examples
(10)Enter SERIALA:00000 in the $SB Allocation Address Field and SERIALA:DM00000 in the $SW Allo-
cation Address Field. Click the OK Button to close the dialog box.
(11)Select Communication Setting from the PT Menu.
(12)Double-click the Serial Port A Icon in the Comm. Setting Dialog Box.
(13)Enter 0 in the NT Link(1:N) Unit No. Field. Click the OK Button to close the dialog box.
Use Save Project As on the CX-Designer File Menu to save the project data created so far for NSH5 No. 1 as
separate projects for NSH5 No. 2 and NSH5 No. 3.
For each of the newly created project, use the following procedure to designate the PLC address that the sta-
tion number will be sent to.
(1) Select Project Properties from CX-Designer's PT Menu.
(2) Click the Macro Tab in the Project Property Dialog Box.
(3) Click the Set Button for the When a bit changed Option.
(4) Click the Edit Macro Button next to the When a bit changed Option.
Enter SERIALA:00000 and
SERIALA:DM00000.
Enter 0.
Appendix E
91