Connecting the Special Cable
2-3
Connecting the Special Cable
Check before Connecting
1,2,3...
Connection Procedure
1,2,3...
26
This section describes how to connect the Special Cable to the PT.
1. Waterproof cable clamps are attached to both ends of the Special Cable.
The cable has inner and outer waterproof packing. The packing is impor-
tant to maintain the cables waterproof capabilities, so be sure it is not lost
or damaged.
NSH5 PT Cable Clamp
Cable attachment
cap
2. Be sure the cable clamp housing is not damaged or dirty before inserting
it into the PT. If the housing is damaged, have it repaired to retain the wa-
terproof capabilities.
1. Using a screwdriver, loosen the four screws on the PT back cover.
2. After the screws have been removed, grasp the cover by the hand holds
and lift it out.
Unit lock
Packing
Cable
housing
packing
Section 2-3
Heat-shrinking
tube