Nomenclature And Functions; Front; Back - Omron NSH5 - 10-2010 Operation Manual

Hand-held programmable terminal
Hide thumbs Also See for NSH5 - 10-2010:
Table of Contents

Advertisement

Nomenclature and Functions

1-2
Nomenclature and Functions
1-2-1

Front

1-2-2

Back

8
It is stipulated in EN 60204-1:1997 that the pushbutton for an emergency stop
must be red and the background yellow. In SEMI-S2 as well, the background
for an emergency shutdown pushbutton must be yellow.
To comply with these standards, a yellow seal is included with the product to
affix around the emergency stop switch.
EN 954-1:1996 General Design Principles
Redundant conformity is provided with an enabling switch and an emergency
stop switch. The emergency stop switch is a three-pole switch (3PST-NC),
with a DPST-NC contact structure and a SPST-NC contact structure for an
emergency stop notification signal.
LED indicator
RUN
F6
F7
F8
F9
F10
5.7-in. TFT*
* PTs with lot numbers 05X0 and
earlier have STN LCDs. Refer
to NSH5-series PT Lot Num-
bers on page 73 for information
on lot numbers.
Hand
hold
Stop/emergency stop switch
F1
F2
F3
Function switches
F4
F1, F2, F6, and F7 are hard-wired outputs.
F5
F3, F4, F5, F8, F9, and F10 are software
(communications) outputs.
Cable
Loose wires and RS-232C cable (3 or 10 m)
Loose wires and RS-422A cable (10 m)
Hand
hold
Enabling switch
Strap attachment holes
Refer to 2-4 Attaching the Hand Strap
for the attachment method.
Section 1-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nsh5-sqg10b-v2Nsh5-sqr10b-v2Nsh5 series

Table of Contents