Top - Omron NSH5 - 10-2010 Operation Manual

Nomenclature and Functions
1-2-3

Top

Display Section
RUN Indicator
Switch Section
Effective display area: 5.7 inches
Liquid crystal: Color TFT LCD with backlight (See note.)
Number of dots: 320 × 240
Number of display colors: 256 (BMP/JPG images: 32,768)
Note PTs with lot numbers 05X0 and earlier have the following specifica-
tion for colors (because they have STN LCDs): 256 (bit maps:
4,096). Refer to NSH5-series PT Lot Numbers on page 73 for infor-
mation on lot numbers.
The NSH5 status indicator is described in the following table.
Color Green
RUN
Indicator
Lit Normal operation
Flashing • Memory Card transfer
completed normally.
• Backlight error discov-
ered after startup.
Not lit • Power is not being supplied.
• A fuse is burned out.
• A system program is damaged and cannot boot.
OMRON A165E-S-03U Stop/Emergency Stop Switch
DPST-NC contact: External output
Rated voltage: 24 V
Maximum rated current: 100 mA (minimum applicable load: 1 mA at 5 VDC)
NO bit: Allocated in internal memory or host (PLC)
OMRON A4E-B200VA Enabling Switch
DPST-NO contact: External output
Rated voltage: 24 V
Maximum rated current: 100 mA (minimum applicable load: 4 mA at 24 VDC)
3-position switch
Operating patterns:
Operation: OFF to ON to OFF
Memory Card slot
USB port
Orange
• Checking file system
at startup.
• Normal operation
with battery voltage
low or battery discon-
nected.
Memory Card transfer
in progress.
Section 1-2
Red
Error occurred at
startup.
Error occurred dur-
ing Memory Card
transfer.
9