A General Specifications - Omron NSH5 - 10-2010 Operation Manual

General Specifications
Item
Rated power supply voltage
Allowable power supply voltage range 20.4 to 27.6 VDC (24 VDC
Power consumption
Ambient operating temperature
(See note 1.)
Ambient storage temperature
(See note 1.)
Ambient operating humidity
Ambient operating environment
Noise resistance
Vibration resistance (during operation) 10 to 57 Hz with double amplitude of 0.075 mm, 57 to 150 Hz with acceleration of
Shock resistance (during operation)
Drop test (See note 2.)
External dimensions
Weight
Enclosure rating (See note 3.)
Ground
Battery life
Applicable standards
Note (1) Operate and store the PT within the temperature and humidity ranges shown below.
(2) Conformance is evaluated under applicable test conditions, and it may not be possible to use the
PT in every environment.
(3) Conformance is evaluated under applicable test conditions, and it may not be possible to use the
PT in every environment. When used over a long period of time, the drip-proof packing may become
damaged or dirty and lose its effectiveness.
Appendix A
General Specifications
24 VDC
10 W max.
°
0 to 40 C
°
−20 to 60
C
35% to 85% max. (with no condensation)
No corrosive gases
Conforming to IEC 61000-4-4: 2 kV (power supply line)
2
9.8 m/s thirty minutes each in X, Y, and Z directions
2
147 m/s three times each in X, Y, and Z directions
Dropped from 1 m. Conforming to JIS B 3502/IEC61131-2.
223 × 179 × 70.5 mm (W × L × H)
1.1 kg max.
IP65
Ω
100 or less
Battery life: 5 years (25
Low battery: Replace within five days of the indicator turning orange. SRAM, RTC
backup possible.
The SRAM and RTC are backed up by a super capacitor for five minutes while
the battery is being replaced. (The power supply to the NSH5 must first be turned
ON for at least 5 minutes and then turned OFF.)
EC Directives and
Temperature (°C)
Specifications
±
15%)
°
C)
UL508
Storage
Operation
69