Omron NS - REV 12 Setup Manual page 13

Safety Precautions
Notation Used for Safety Information
The following notation is used in this manual to provide precautions required to ensure safe
usage of the product.
The safety precautions that are provided are extremely important to safety.
Always read and heed the information provided in all safety precautions.
The following notation is used.
! WARNING
Symbols
Always ensure that the personnel in charge confirm
that installation, inspection, and maintenance were
properly performed for the PT. "Personnel in charge"
refers to individuals qualified and responsible for
ensuring safety during machine design, installation,
operation, maintenance, and disposal.
Ensure that installation and post-installation checks
are performed by personnel in charge who possess
a thorough understanding of the machinery to be
installed.
Do not use the input functions of the PT, such as the
function switches or switches on the touch panel, in
applications that involve human life, in applications
that may result in serious injury, or for emergency
stop switches.
Do not attempt to disassemble, repair, or modify the
PT. Doing so may impair the safety functions.
Do not attempt to take the Unit apart and do not
touch any internal parts while the power is being
supplied. Doing either of these may result in
electrical shock.
The NS15-TX01 @ -V2 uses an analog touch panel.
Never press more than two points on the panel at a
time. Otherwise, it may activate a switch somewhere
between the two points.
Indicates a potentially hazardous situation which, if not avoided,
will result in minor or moderate injury, or may result in serious injury
or death. Additionally there may be significant property damage.
Prohibition
Indicates a general prohibition
Caution
Indicates general cautionary, warning, or
danger level information
11