Calendar Check - Omron NS - REV 12 Setup Manual

Reference
NS12, NS10, NS8, or NS5
This function sets the backlight brightness to one of three levels.
The default setting is high.
Set the brightness of the backlight by using operations from the PT Tab Page in the System
Menu, as follows:
1. Select one of the three backlight brightness levels to set to high, middle, or low.
2. After setting, press the Write Button to save the setting.
6-3-6

Calendar Check

This function displays the time and date of the PT's internal system clock.
The factory settings for the date and time are not correct.
Set and display the date and time by using operations from the PT Tab Page in the System
Menu, as follows:
1. The currently set date and time will be displayed in the Date and Time Setting field.
2. To change the date/time, set the date/time in the dialog box that is displayed by pressing the
date and time field.
•
Use the following input format to set the date:
Set the year using four digits.
Example: Set March 15, 2002 as 2002.3.15. (Adding 0 prefix to single-digit settings is not required.)
• Use the following input format to set the time.
Set the year using the 24-hour clock.
Example: Set 06:01:01 p.m. as 18.1.1. (Adding 0 prefix to single-digit settings is not required.)
5. Press the Enter Button to enable the settings.
• The backlight brightness cannot be changed using $SB6 to $SB8 in system memory if
External is set for the backlight brightness. To change the backlight brightness by us-
ing $SB6 to $SB8, turn OFF external brightness adjustment by selecting High, Middle,
or Low.
• Steps 3 and 4, above, are required only if External is set.
yyyy.mm.dd (yyyy: year, mm: month, dd: day)
hh.mm.ss (hh: hour, mm: minute, ss: second)
6-3 PT Settings
6-27