Section 4 Parameter Setting; Overview; Heading Symbols; Setting Procedures - Omron K3NP - 1998 Operation Manual

Period meter

Table of Contents

4-1

FUNCTION

SETTING

PROCEDURE

REFERENCE

MODELS

The following symbols are used for headings in this section.

This symbol precedes an explanation of the parameter's meaning and function.

This symbol precedes a description of the settings, setting range, and default

value.

This symbol precedes an explanation of procedures for parameters that specify

operations.

This symbol precedes a listing of references and related parameters.

This symbol precedes a listing of the models in which this parameter can be

used.

· The K3NP has four modes: RUN mode for normal operations, Setting mode for

initial parameter input, Protect mode for lock-out configuration, and Mainte-

nance mode for initializing set values. The parameters that are accessible on

any individual K3NP will vary depending on the Output Board installed. Refer

to Appendix D Available Parameters.

· The K3NP is in RUN mode when the K3NP is turned on. Parameter settings in

protect or setting mode are described below on the basis that the parameters

are set for the first time.

For the operation in RUN mode, refer to Section 5 Operations in RUN Mode.

· The setting examples are provided on condition that the factory-set values of

the K3NP have not been changed.

Section 4-1

Table of Contents

Chapters

Table of Contents

K3np