Word Length ( Len ); Stop Bits ( Sbit ); Parity Bits ( Prty ) - Omron K3NP - 1998 Operation Manual

Setting Mode
Word Length
len
Stop Bits
sbit
Parity Bits
prty
FUNCTION
SETTING
MODELS
SETTING
Follow the steps described below to set the following.
EXAMPLE
1, 2, 3...
58
· The communications format used for communicating with the host computer is
set in the setup menu.
· Refer to the Communications Manual for the communications format in detail.
· Word Length
Setting
7/8
· Stop Bits
Setting
1/2
· Parity Bit
Setting
none: None
eUen: Even
odd: Odd
This setting is available for the K3NP with the Communications Output Board.
Word length: 8 bits
Number of stop bits: 1
Parity bits: none
Set Value LED Display Model
1. Press the Mode Key for more than one second while the setup setup menu
is displayed. The func operating mode setting will appear.
Set Value LED Display Model
2. Repeatedly press the Mode Key until the len word length setting is dis-
played.
Set Value LED Display Model
Unit
bit 7
Unit
bit 2
eUen
Basic Model
Basic Model
Basic Model
Section 4-2
Default
Default
Default