Remote/Local Programming ( R-L ) - Omron K3NP - 1998 Operation Manual

Setting Mode
Remote/Local Programming
r-l
FUNCTION
SETTING
MODELS
SETTING
Follow the steps described below to set the K3NP to remote programming.
EXAMPLE
1, 2, 3...
· The K3NP can be set to remote or local mode in the option menu. The K3NP in
remote mode is operated through the host computer and the K3NP in local
mode is operated through the front panel key input.
Setting
Remote: rmt
Local: lcl
This setting is available for the K3NP with the Communications Output Board.
Set Value LED Display Model
1. Press the Mode Key for more than one second while the opt option menu is
displayed. The aUg setting will appear.
Set Value LED Display Model
2. Repeatedly press the Mode Key until the r-l remote/local setting is dis-
played.
Set Value LED Display Model
3. Press the Shift Key to display the prior setting lcl for changing. The PROG
indicator will flash.
Set Value LED Display Model
4. Press the Up Key to display rmt .
Set Value LED Display Model
Default
lcl
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
Section 4-2
67