Omron E5EK User Manual page 123

Parameter No.
28 Set point upper limit
27 Set point lower limit
72 PID / ON/OFF
73 ST
34 ST stable range width
35
α
85 AT calculated gain
37 Standby sequence reset method
36 Automatic return of display mode
93 AT hysteresis
55 LBA detection width
82 HBA latch
89 Travel time
38 PV dead band
29 Remote SP enable
91 Remote SP upper limit
90 Remote SP lower limit
39 SP tracking
*1 During temperature input, the range becomes the range of use of the selected sensor instead of the scaling upper/lower limit
values
*2 See page 5-35.
Parameter
*1
*1
SP setting lower limit to SP setting upper limit
SP setting lower limit to SP setting upper limit
6.4 Commands and Responses
Data Setting Range
Set point lower limit +1 to scaling upper limit
Scaling lower limit to Set point upper limit -1
0: Advanced PID, 1: ON/OFF
0 : OFF, 1 : ON
0.1 to 999.9
0.00 to 1.00
0.1 to 10.0
0, 1
0 to 99
0.1 to 9.9
0.0 to 999.9
0: OFF, 1: ON
1 to 999
0 to 9999
0: Enabled, 1: Disabled
0: OFF, 1: ON
Mode
Expansion p
*2
Option p
6--9