Configuring The Operating Mode Within A Booth; Configuring The Language Options For The Interpreter Booths - Sennheiser SDC 8200 AO System Manual

Options
3 Mode between Booth
Mode between Booths
Mode = Override
Press ENTER to Save
Options
4 Mode in Booths
Mode in Booths
Mode = Mixed
Press ENTER to Save
Interpretation
1 Configuration
Save Config.
Yes
Press ENTER to Save
From the central unit's operating menu, choose "
Options Mode between Booth
" " and "
The current mode in shown on the display.
Choose the desired mode.
You can choose between the modes "
Override ".
Mixed
– Choose " " if interpreters in different booths interpret into the
same target language and work in turns.
When two interpreters simultaneously interpret into the same lan-
guage, the red signal light ring
LED on their consoles light up.
Override
– Choose "
booth turns off the currently active interpreter console. The inter-
preter console that was just turned off can only be turned on again if
the interpreter console by which it was turned off is deactivated.
Toggle Override
– Choose "
another booth turns off the currently active interpreter console. The
interpreter console that was just turned off can be turned on again
any time by pressing the MIC key
Press the ENTER key to save your setting.

Configuring the operating mode within a booth

To determine whether or not the interpreter consoles installed within a
booth can be simultaneously active:
From the central unit's operating menu, choose "
" Options " and " Mode in Booths
The current mode in shown on the display.
Choose the desired mode.
You can choose between the modes "
– Choose " Mixed " if several interpreters in the same booth interpret
into the same language. When two interpreters simultaneously
interpret into the same language, the red signal light ring
"Microphone active" LED
Toggle Override
– Choose "
within a booth turns off the currently active interpreter console. The
interpreter console that was just turned off can be turned on again
any time by pressing the MIC key

Configuring the language options for the interpreter booths

Configuration
The " " menu item on the "
you to configure the language options for the interpreter booths:
the main target language (A-channel)
the second target language (B-channel)
the auto-relay interpretation for the interpreters (auto-floor)
After having configured the language options as described in the fol-
lowing sections, press the EXIT key to get to the display shown on the
left.
Press the ENTER key to save your configuration and to exit the "
Configuration
" menu.
Configuring the SDC 8200 system
" one after the other.
Mixed
", "
and the "Microphone active"
" if activating an interpreter console in another
" if activating an interpreter console in
.
" one after the other.
Mixed
" and "
on their consoles light up.
" if activating another interpreter console
.
Interpretation
Interpretation
",
Override Toggle
" and "
Interpretation
",
Toggle Override
".
and the
" menu allows
Booth
97