Table of Contents
Advertisement
Configuring the SDC 8200 system
Diagnostics
1
Port Errors
Port Errors
[!]
P1
P2
P3
P4
P5
System
2
Camera Conrol
Camera Control
Status = OFF
Press ENTER to Save
System
3
Control Panel
Control Panel
Status = OFF
Press ENTER to Save
110
Checking the communication within a cable string
To display if and on which port(s) a communications error has occured:
From the central unit's operating menu, choose "
Diagnostics
"
The ports "
play.
The symbols have the following meanings:
: A cable string with consoles is connected to the port.
: No cable string is connected to the port. If this symbol appears even
P6
though a cable string is connected to the port, check if the cable string
is connected correctly.
[!]
: A communications error has occured. This symbol only appears if a
cable string is connected to the port.
Configuring connected additional components
Turning on/off a camera control
If you connect an external camera control to the central unit, you have to
activate the camera control via the central unit's operating menu.
To turn a connected camera control on:
From the central unit's operating menu, choose "
Control
" one after the other.
The current status of the camera control is shown on the display.
Status = ON
Choose "
Turning on a connected control panel
instead of controlling the SDC 8200 conference and interpretations system
via a PC with software control, you can use a control panel (optional).
The control panel is a miniature physical representation of your conference
room, allowing you to turn on or off individual conference consoles, change
the volume, change the conference mode, display the status of the inter-
preter booths, etc.
The control panel will be custom tailored to your specific requirements.
To turn a connected control panel on:
From the central unit's operating menu, choose "
Control Panel
"
The current status of the control panel is shown on the display.
Choose "
Status = ON
Port Errors
" and "
P1
P6
" to "
" with a respective symbol are shown on the dis-
" and press the ENTER key to save your setting.
" one after the other.
" and press the ENTER key to save your setting.
" one after the other.
System
" and "
System
System
",
Camera
" and
Hide quick links:
Advertisement
Table of Contents
