Table of Contents
Advertisement
Configuring the SDC 8200 system
>Volume =
P1
P2
P3
P4
P5
60
Configuring the SDC 8200 system
After having connected all system components, you have to configure
your conference and interpretation system via the central unit's operating
menu.
Introduction to the central unit's operating menu
Via the central unit's operating menu, the SDC 8200 conference and inter-
pretation system can be configured for any room, any number of partici-
pants and any conference use.
Note!
General information on how to use the central unit's operating menu is
given in the section "Working with the central unit's operating menu"
on page 42.
The start display
After turning on the central unit, the start display appears, showing:
the current volume setting for the consoles' built-in loudspeakers
to which of the ports "
consoles is connected
P6
: means: A cable string is connected to this port.
: means: No cable string is connected to this port (see section "Making a
system diagnosis" on page 109).
To get from the start display into the central unit's operating menu:
Press the ENTER key.
Conference
The "
The six main menus
The central unit's operating menu consists of six main menus:
Conference
Via the "
and the conference consoles.
Interpretation
Via the "
system and the interpreter consoles.
Aux-In/Out
Via the "
AUX inputs and outputs.
System
Via the "
activate and configure optional components for monitoring and control-
ling the system.
Via the "*
Language
ing menu.
License
Via the "
tral unit, display the current license code and enter a new license code.
P1
P6
" to "
" of the central unit a cable string with
" main menu appears on the display.
" menu, you can configure the conference system
" menu, you can configure the interpretation
" menu, you can choose the audio settings for the
" menu, you can make a system diagnosis as well as
" menu, you can choose the language of the operat-
" menu, you can display the serial number of the cen-
Hide quick links:
Advertisement
Table of Contents
