The Components Of The Sdc 8200 System In Detail; The Consoles - Sennheiser SDC 8200 AO System Manual

The components of the SDC 8200 system in detail

14
The components of the SDC 8200 system
in detail
The components described on the following pages are available for the
SDC 8200 conference and interpretation system. The components you
require depend on the desired size and use of the SDC 8200 system.
Your conference and interpretation system can comprise the following
consoles:
two types of conferences consoles
– the delegate units for the conference participants
– the chairman unit for the chairman
the interpreter consoles
In addition, your conference and interpretation system must comprise:
at least one central unit
Optionally, you can connect the following components:
an analog output unit
a control panel
a special "ambient sound" conference console

The consoles

Six conference console versions with varying levels of functions as well as
an interpreter console are available.
All consoles feature:
a built-in loudspeaker via which the floor channel is output
a microphone key
a microphone – if the microphone is active, the red signal light ring and
the "Microphone active" LED light up permanently
a headphone connection with headphone volume control
voting keys with LEDs (either 3 or 5 voting keys, depending on the con-
sole version)
The chairman units (SDC 8200 C, SDC 8200 CC and SDC 8200 CV) addition-
ally feature:
a priority key for turning off all active delegate units
a NEXT key for assigning the "speaking right" to the next participant
who has made a request to speak (SDC 8200 C and SDC 8200 CC only).
Conference consoles with channel selection keys
SDC 8200 DV and SDC 8200 CV) feature:
a 2-digit LED channel display for displaying the selected interpretation
channel and two channel selection keys ("
ing the interpretation channel.
The selected interpretation channel is output via connected headphones.
for activating the microphone
(SDC 8200 DC, SDC 8200 CC,
" and " ") for select-