Sennheiser SDC 8200 AO System Manual page 31

Note!
You cannot "apply" for a comment by pressing the microphone
key .
Signal your intention to take the floor e.g. by raising your hand or giv-
ing another sign.
The conference manager can either assign you the "speaking right" by
turning on your microphone or ignore your request to speak.
When the conference manager turns on you microphone, the red signal
light ring and the "Microphone active" LED
up permanently. When the conference manager withdraws the "speak-
ing right" from you, the red signal light ring
active" LED on your console go off.
9. In "With request" mode:
In this mode, the SDC 8200 system can be controlled either by the chair-
man or via the PC. You can cancel your request to speak.
The chairman can use the NEXT key
the menu selection keys
right" in the order of application.
If the SDC 8200 system is PC controlled, the "speaking right" can be
assigned independently of the order of application.
Press the microphone key
The green "Request to speak" LED
The chairman or the conference manager can either assign you the
"speaking right" by turning on your microphone or ignore your request
to speak.
When the chairman or the conference manager turns on your micro-
phone, the red signal light ring
on your console light up permanently and the green "Request to
speak" LED goes off. When the chairman or the conference manager
withdraws the "speaking right" from you, the red signal light ring
and the "Microphone active" LED
Note!
You can cancel your request to speak by pressing the microphone key
once more.
10.In "With Req. No clear" mode:
In this mode, the SDC 8200 system can be controlled either by the chair-
man or via the PC. You cannot
The chairman can use the NEXT key
the menu selection keys
right" in the order of application.
If the SDC 8200 system is PC controlled, the "speaking right" can be
assigned independently of the order of application.
Press the microphone key
The green "Request to speak" LED
The chairman or the conference manager can either assign you the
"speaking right" by turning on your microphone or ignore your request
to speak.
Operating the components of the SDC 8200 system
(SDC 8200 C and SDC 8200 CC) or
(SDC 8200 CV) for assigning the "speaking
to "apply" for a comment.
on your console starts flashing.
and the "Microphone active" LED
on your console go off.
cancel your request to speak.
(SDC 8200 C and SDC 8200 CC) or
(SDC 8200 CV) for assigning the "speaking
to "apply" for a comment.
on your console starts flashing.
on your console light
and the "Microphone
31