Table of Contents
Advertisement
Configuring the SDC 8200 system
Interpretation
4
Options
Options
1
Max Booths
Options
2
Max Desks
96
Options
Options
The "
" menu item on the "
configure the basic features of your interpretation system:
The max. number of interpreter booths or languages
The max. number of interpreter consoles per booth
The operating mode between the interpreter booths
The operating mode within the interpreter booths
You can connect a total of 28 booths with up to eight interpreter consoles
each to a single central unit SDC 8200 CU, i.e. you can realize an interpre-
tation system with up to 224 interpreter consoles.
Setting the max. number of interpreter booths/languages
You have to configure an interpreter booth for each language offered:
From the central unit's operating menu, choose "
Options
Max Booths
"
" and "
The current number of booths is shown on the display.
Set the max. number of booths/languages for your interpretation sys-
tem and press the ENTER key to save your setting.
Note!
The maximum number of configurable languages also depends on your
license. The configuration of four languages is license-free. In order to
be able to configure more than four languages, you have to purchase
one of the language licenses available (see "Licenses for expanding the
SDC 8200 CU central unit" on page 115).
Example:
Let us assume that the active languages at a conference are English,
German and French. You then have to configure your system so that it
comprises an "English" booth, a "German" booth and a "French" booth.
Setting the max. number of interpreter consoles per booth
To set the max. number of interpreter consoles per booth:
From the central unit's operating menu, choose "
Options
Max Desks
"
" and "
The current number of interpreter consoles is shown on the display.
Set the desired number of interpreter consoles and press the ENTER key
to save your setting.
Example:
Let us assume that the active languages at a conference are English,
German and French and that two interpreters are available for each
language. You then have to configure your system so that it comprises
three interpreter booth with two interpreter consoles each.
Configuring the operating mode between booths
To determine whether or not interpreter consoles installed in different
booths but configured to the same target language can be simultaneously
active:
Interpretation
" menu allows you to
Interpretation
" one after the other.
Interpretation
" one after the other.
",
",
Hide quick links:
Advertisement
Table of Contents
