Sennheiser SDC 8200 AO System Manual page 113

License
3 Upgrade License
Upgrade License
0
Upgrading the license of your conference and interpretation system
The SDC 8200 CU and SDC 8200 CU-M central units come with a basic
license, allowing the configuration of four languages/interpretation chan-
nels as well as the "camera control" function.
Please note that only the SDC 8200 CU central unit can be expanded by
purchasing licenses for further languages/interpretation channels. These
licenses (see "Licenses for expanding the SDC 8200 CU central unit" on
page 115) are available from Sennheiser electronic.
To enter a new license code:
From the central unit's operating menu, choose "
Upgrade License
" " one after the other.
" 0 " is shown on the display.
Turn the jog wheel
new license code is shown on the display and then press the ENTER key.
In the same way, enter all other characters of the new license code one
after the other until the new license code is entered completely.
If you entered a wrong character:
Press the EXIT key to exit this menu item.
Upgrade License
" " is shown on the display.
Press the ENTER key. "
Re-start entering the new license code.
Configuring the SDC 8200 system
on the central unit until the first character of the
0
" is shown on the display.
License
" and
113