Side Panel, Bottom Cover - Sony SUPER MOTION HDC-P43 Service Manual

4-4.

Side Panel, Bottom Cover

Procedure
1. Remove the side panel (L), side panel (R) and bottom cover.
(1) Remove the six screws (B2 x 5) and remove the side panel (L).
(2) Remove the six screws (B2 x 5) and remove the side panel (R).
(3) Remove the four screws (B3 x 10), tilt the rear panel assembly in the direction of the arrow, and release the
hole of the bottom cover from the boss of the rear panel assembly.
(4) Release the two holes of the bottom cover from the two bosses of the front panel assembly, and then remove
the bottom cover.
B2 x 5
Side panel (L)
2. Install the removed parts by reversing the steps of removal.
HDC-P43
Bottom cover
Holes
Bosses
B3 x 10
Side panel (R)
Hole
Boss
B3 x 10
Rear panel assembly
B2 x 5
4-5