Table of Contents
Advertisement
2.
Adjust the luminance control of the pattern box so that the white portion in the center of the chart is 573 ±6 cd/m
Tip
This corresponds to the luminous intensity on the 89.9%-reflective chart at 2000 lx.
Chart
1 m
5-1-4.
Setup Menu
Camera equips setup menu. Some of adjustments given in this section use the setup menu without MSU.
In setup menu, operate from TOP MENU screen on the camera.
Configuration of TOP MENU screen is as follows.
• USER menu
• USER MENU CUSTOMIZE menu
• ALL menu
• OPERATION menu
• PAINT Menu
• MAINTENANCE Menu
• FILE Menu
• DIAGNOSIS menu
• SERVICE Menu
Note
For how to display the SERVICE menu, refer to
The setup menu operation is described as follows.
Example: When the AUTO SETUP page of MAINTENANCE menu is selected from the TOP menu and AUTO LEVEL
is performed.
MENU: MAINTENANCE
PAGE: AUTO SETUP
ITEM: AUTO LEVEL
Displaying TOP MENU screen
1.
Turn the DISPLAY/MENU switch to the MENU side while pressing the MENU SEL knob/ENTER button.
[TOP] appears at the upper right of the screen of the monitor connected to SDI 1 connector.
2.
Set the cursor at [TOP] and press the MENU SEL knob/ENTER button.
The TOP MENU screen showing the entire configuration of menu items appears.
HDC-P43
Luminance meter
"5-1-4-2. Displaying the SERVICE
2
.
menu.".
5-4
Advertisement
Table of Contents
