Table of Contents
Advertisement
When any board of this unit is repaired or replaced, adjust this unit for electrical alignment as this section.
Note
• Perform the
"5-4. Video System Level Adjustment"
• Master setup unit MSU-1000/1500 is used for electrical alignment of the unit.
Without using master setup unit (here after MSU), the electrical alignment also can be made using remote control
unit (RCP-1000/1500) or setting menu of the camera.
Refer to
"5-1-7. Setup Menu Correspondence List"
• Camera control unit HDCU4300 is used for electrical alignment of the unit.
Without using camera control unit, the electrical alignment also can be made using base band processor unit
(BPU4000/4500).
5-1.
Preparations
Turn on the power switch before starting adjustments, and warm up the unit for about 10 minutes.
5-1-1.
Required Equipment, Tool
Note
Use calibrated equipment and tools.
Equipment Required
Name
4K waveform monitor
4K color monitor
Master setup unit
CCU extension adapter
Camera control unit
Baseband processor unit
Camera extension adapter
Lens
Tool
Name
Grayscale chart (16 : 9 reflective type)
Grayscale chart (16 : 9 transparent type)
Pattern box PTB-500
HDC-P43
Section 5
Electrical Alignment
according to the system that the customer uses.
for detail of setup menu.
Equipment
Leader Electronics LV5490 (multi waveform monitor) or equiv-
alent
Sony BVM-X300 or equivalent
Sony MSU-1000/1500
Sony HKCU-SM100
Sony HDCU4300
Sony BPU4000/4500
Sony HDCE-100
(Required when using the BPU4000/4500.)
Canon HJ18 or equivalent
Sony Part No.
Remarks
—
Commercially available
Since time degradation is appeared, replace for every two years.
(The exchange time, change by the safekeeping situation.)
J-6394-080-A
Use when the grayscale chart (16 : 9 reflective type) is not avail-
able.
J-6029-140-B
5-1
Advertisement
Table of Contents
