Table of Contents
Advertisement
3-1.
Device Check
This unit is provided with a self-diagnosis function for checking the communication function of each device.
Diagnosis result can be monitored on the BOARD STATUS page of the DIAGNOSIS menu.
3-1-1.
BOARD STATUS (DIAGNOSIS menu)
When "NG" is displayed on this page, there may be a problem with the relevant device or its connection.
<BOARD STATUS>
OHB : OK
DPR : OK
SY
: OK
PS
: OK
HOURS METER : xxxx H
Item
Setting:
OHB
Display only
DPR
Display only
SY
Display only
PS
Display only
HOURS METER
Display only
3-1-2.
Displaying
1.
Turn the DISPLAY/MENU switch to the MENU side while pressing the MENU SEL knob/ENTER button.
[TOP] appears at the upper right of the screen of the monitor connected to SDI 1 connector.
2.
Set the cursor at [TOP] and press the MENU SEL knob/ENTER button.
The TOP MENU screen showing the entire configuration of menu items appears.
3.
Set the cursor to [DIAGNOSIS] and press the MENU SEL knob/ENTER button.
4.
Set the cursor to [BOARD STATUS] and press the MENU SEL knob/ENTER button.
HDC-P43
Section 3
Diagnostics
D02 TOP
Function
Indicates the status of the LSI (IC005) on the BI-291 board.
Indicates the status of the LSI (IC1001) on the DPR-376 board.
Indicates the status of LSI (IC701) on the SY-449 board.
Indicates the status of power supply on the PS-921 board.
Displays the total working time.
3-1
Advertisement
Table of Contents
