Table of Contents
Advertisement
9-5.
Interface Boards
9-5-1.
CN-3883 Board
This board contains a DC power input connector (XLR 4-pin, male).
9-5-2.
CN-3896 Board
This board contains a Network Trunk connector (RJ-45).
9-5-3.
IF-1307 Board
This board is provided with 2-channel SDI connector, output the generated SDI signals in DPR-376 board.
HD-Trunk input signal from the SDI 2 connector that is available for input is sent to DPR-376 board.
Generated prompter signal on DPR-376 board is converted to analog signal by IC200.
The converted signal is output to the prompter signal output connector via SW-1705 board.
This board contains PHY for Network Trunk IF, it communicates with DPR-376 board and CN-3896 board, performs
the Network Trunk.
9-5-4.
LE-411 Board
This board contains an acceleration sensor (SE001), and send tilt information to SY-449 board.
This board also contains front tally LEDs (red, green).
This board also contains lens connector (12-pin round type, female).
9-5-5.
SW-1705 Board
This board contains switches (POWER, DISPLAY/MENU) and rotary encoder (MENU) on rear panel.
This board also contains rear tally LEDs (red, blue, green) and indicators (POWER, NETWORK, CONDITION).
This board also contains prompter output connector (BNC), USB connector (USB 2.0 type A 4-pin) and external input/
output connector (EXT I/O: D-sub, 15-pin).
DC fan is connected.
HDC-P43
9-5
Advertisement
Table of Contents
