Reference File; Reference File Operation - Sony SUPER MOTION HDC-P43 Service Manual

7-5.

Reference File

Reference files can be stored in the camera and USB drive.
Scene files can also be stored in the memory stick if the master setup unit (here after MSU) is used. For details, refer to
the MSU operation manual.
Data is stored and called using the setup menu or MSU.
Reference files can be copied between cameras using the USB drive.
Note
• Reference File stores the differential data taking the factory-setting as 0. Therefore, initializing the Reference File
brings the settings to the same status at the factory setting. If Lens File or OHB File retains the data, they need to
be initialized as well.
To initialize data, use the setup menu. You can select all file items or only specified items to initialize.
• Reference File data stored in the USB drive cannot be read when the power is just turned on.
7-5-1.

Reference File Operation

Outline Figure of Operation
Camera unit
Current paint data
Output to hardware
Storing
Reference: Refer to step 1 of
Using FILE menu of this unit
1. Store the current status of the reference file.
[FILE] → [REFERENCE] → [STORE FILE]
Reference file data is stored in the camera and numerical data is indicated as 0.
(Except for some data. Refer to
With MSU
1. Press the FILE button in the menu operational area on the operation panel.
2. Select [Reference] → [Reference Store] by the menu operation.
Reference file data is stored in the camera and numerical data is indicated as 0.
(Except for some data. Refer to
HDC-P43
USB drive
Storing in
USB drive
(Step 4)
Storing
(Step 1)
Reference File
Calling
(Step 2)
7-5-1."Outline Figure of Operation".
"7-8. File Items".)
"7-8. File Items".)
Reading from
USB drive
(Step 3)
Initializing
Reference File
(Step 5)
factory-set value
(Initial value 0)
7-7