Table of Contents
Advertisement
8-1.
Overview of Setup Menu
Some of adjustments given in this section use the setup menu. The setup menu consists of the following menus.
Besides there is a TOP menu indicating the entire configuration of menu items.
• USER menu
• USER MENU CUSTOMIZE menu
• ALL menu
• OPERATION menu
• PAINT Menu
• MAINTENANCE Menu
• FILE Menu
• DIAGNOSIS menu
• SERVICE Menu
8-1-1.
How to Display the SERVICE Menu/How to Change the Setting Values
Displaying the SERVICE menu.
1.
Display the MAINTENANCE menu.
2.
Set the cursor at [AUTO SETUP] on MAINTENANCE menu and press the MENU SEL knob/ENTER button for
at least 10 seconds.
The cursor shifts to [AUTO BLACK].
3.
Set the DISPLAY/MENU switch to OFF, and then turn the switch to the MENU side again.
The SERVICE menu is displayed.
Changing Setting Values
• Select a menu item by turning the MENU SEL knob/ENTER button and it is entered by pressing the MENU SEL
knob/ENTER button.
• For items whose values can be modified by turning the MENU SEL knob/ENTER button, set values can be entered
or suspended by the following operations.
To enter:
Press the MENU SEL knob/ENTER button.
To suspend:
Set the DISPLAY/MENU switch to OFF.
To restart the setting operation, turn the DISPLAY/MENU switch to the MENU side again.
Exiting menu
Set the DISPLAY/MENU switch to OFF.
8-1-2.
Settable Special Function
The following function is made available by setting it by the SERVICE menu.
Not that this function is limited.
HDC-P43
Section 8
Setup Menu
8-1
Advertisement
Table of Contents
