Table of Contents
Advertisement
6 / CARING FOR AND CLEANING YOUR APPLIANCE
• •
PROGRAM A PYROLYSIS
•Instant pyrolysis
Warning
Remove the grids and trays from the
oven and clean any major spill residue.
- - Check that the programmer is displaying the
time of day and that it is not flashing.
You can choose between 3 pyrolysis cycle
times:
pyrolysis lasting 1 hour 30 minutes.
pyrolysis lasting 1 hour 45 minutes.
pyrolysis lasting 2 hours
Press the S S T T A A R R T T button (fig.1).
Then press once on the button - until the "P P "
symbol flashes in the display (fig.2).
Confirm the selection by pressing S S T T A A R R T T .
The pyrolysis time displays 2 hours, but you
can change this time. The
flashes.
Example: pyrolysis cycle of 1h 45mins.
Press the + or - touch controls to set the
desired time (fig.3)
Confirm the selection by pressing S S T T A A R R T T .
The pyrolysis cycle begins and the
symbol stops flashing. The countdown of the
time begins immediately.
During the pyrolysis cycle, the
light is activated to indicate that the door is
locked (fig.4).
At the end of the pyrolysis cycle 00:00 flashes.
- - When the oven is cool, use a damp cloth to
remove the white ashes.
The oven is clean and once again ready for the
cooking application of your choice.
START
STOP
START
STOP
START
STOP
symbol
lock warning
21
START
STOP
EN
fig.1
fig.2
fig.3
fig.4
Advertisement
Table of Contents
